Lift Structures

LIFT STRUCTURES CAN BE BOTH STYLISH AND FUNCTIONAL

Axess 2 has a number of metal lift structures to complement the range of platform lifts we offer.

These steel or aluminium lift shafts are available in a wide range of colours and finishes. There are also multiple cladding options so an Axess 2 lift structure can be built to suit any environment, whatever the style and surroundings.

As you would expect, our lift structures comply with all Building Regulations and hold all appropriate accreditations.

These metal lift structures can be quickly and easily installed and are suitable for indoor or exterior use.

Aluminium Lift Structure

structure aluminium 300x222 - Lift Structures
This aluminium lift shaft structure has a load rating up to 480 kg and is suitable both for interior and exterior environments. The shaft structure is constructed of extruded aluminium custom-cut vertical uprights with extruded aluminium adjustable horizontal cross beams.

The structure is equipped to allow the insertion of various glazing options, aluminium panels, stainless steel sheet panels or honeycomb sandwich panels. A reversible glazing bead allows the glazing or panels to be installed either flush with the interior wall or exterior wall.

Available with natural anodised finish, NEW silver polished finish or polyester paint in any of the RAL colour range.

Code Loads(*) Vertical Upright Structural Cross Beams Architectural Cross Beams Adjustable Cross Beams
Slim 320Kg 40 x 80 40 x 114 40 x 114 Yes
Std 320Kg 70 x 70 40 x 114 40 x 114 Yes
Big 480Kg 100 x 100 40 x 114 40 x 114 Yes

(*) Loads are only as an example because these values are subject to exposure, seismic activity, lift type and availability of fixing to building.

Features at a Glance

  • QUICK AND EASY ASSEMBLY
  • AVAILABLE IN A RANGE OF PROFILE SIZES
  • CURVED PROFILE SECTION VERTICAL UPRIGHT
  • INTERIOR CLADDING WITHOUT DOUBLE WALL
  • GLASS, STEEL AND ALUMINIUM CLADDINGS
  • SPECIAL REVERSIBLE GLAZING BEAD
  • ADJUSTABLE HORIZONTAL BEAMS ON ALL SIDES
  • BEADING GASKETS FOR CLADDINGS
  • FULL RANGE OF ACCESSORIES
  • ADDITIONAL INTERIOR COVERINGS FOR CROSS BEAMS AND UPRIGHTS AVAILABLE
  • ANODISED FINISH
  • COMPLETE RANGE OF RAL COLOURS
  • NEW SILVER POLISHED FINISH
Steel Lift Structure

structure steel 300x225 - Lift Structures

As with the aluminium structure, the steel lift shaft structure is suitable both for interior and exterior environments. The shaft structure consists of square or curved profile vertical uprights and press-folded connection beams which are adjustable on the door side.

The structure is equipped to allow the insertion of various glazing options, aluminium panels, stainless steel sheet panels or honeycomb sandwich panels. The lift structure can either be constructed to allow the chosen glazing or panels to be mounted flush with the interior or flush with the exterior. A weathertight seal is maintained with either method using EPDM sealing gaskets.

Choose with different finishes: rough, primed (RAL 7001), polyester powder paint in any of the RAL colour range, cataphoresis, and stainless steel for ultimate protection against harsh environment.

(*) Loads are only as an example because these values are subject to exposure, seismic activity, lift type and availability of fixing to building.

Features at a Glance

  • STRUCTURAL PERFORMANCE
  • QUICK AND EASY ASSEMBLY
  • AVAILABLE IN A RANGE OF PROFILE SIZES
  • SQUARE OR CURVED VERTICAL UPRIGHTS AVAILABLE
  • INTERIOR CLADDING WITHOUT DOUBLE WALL
  • ADJUSTABLE HORIZONTAL BEAMS ON DOOR SIDE
  • EPDM SEALING GASKETS FOR ALL CLADDINGS
  • INTEGRATED SAFETY DRAINAGE ON BEAMS
  • THREADED HOLE BRACKETS FOR SINGLE BOLT
  • FULL RANGE OF ACCESSORIES AVAILABLE
  • ADDITIONAL INTERIOR COVERINGS
  • COMPLETE RANGE OF RAL COLOURS
Code Loads(*) Vertical Upright Structural Cross Beams Architectural Cross Beams Adjustable Cross Beams
Pres-Slim 320Kg 50 x 110 x 4 40 x 114 50 x 32 Yes (side doors)
Pres-Sli-X 320Kg 50 x (var) x 4 40 x 114 50 x 32 Yes (side doors)
Pres-Std 1000Kg 100 x 100 x 4 48 x 100 50 x 32 Yes (side doors)
Pres-Curv 1000Kg 100 x 100 x 4 40 x 114 50 x 32 Yes (side doors)
Laquila Skin Structure

laquila skin steel structure

Product Description

The Laquila SKIN structure benefits from all the characteristics of the steel structure while using DI-NOC 3M films for a finish with outstanding architectural and performance features. Laquila SKIN dramatically extends the creative options available while considerably increasing the durability of the final structure, at extremely low costs.

Durability Warranty

DI-NOC products are guaranteed(1)) for up to 12 years (depending on type and exposure), are flame-retardant and carry the CE marking.

Combined SKIN and RAL Solutions

Laquila SKIN is available in 2 different solutions:

EXTERNAL

All material painted with dry-state polyester powders in the matching RAL colour(2) + DI-NOC film only on the outside of the structure (the cladding is applied to the outside of the uprights, the crossbeams, the glass doors, the door frames and any blind panels). This solution strikes the right balance between architectural and budget considerations. The structure is completely clad on the outside. On the inside, it will be finished in a RAL colour to match the pattern (with coloured glass, due to the reflected light the exact finish of the inside of the shaft is not always clearly visible: this makes the use of the cladding on the outside only more acceptable).

COMPLETE

All material painted with dry-state polyester powders in the matching RAL colour(2) + DI-NOC film on the outside and inside of the structure (the cladding is applied to the outside of the uprights, the crossbeams, the glass doors, the door frames and any blind panels + to the inside of the shaft: upright casing, cross beam casing and glazing beads). This is the most radical solution, with virtually no compromise on appearance. It is preferable for indoor installations where the finest possible appearance is required, and where the lift enclosure is in clear glass with bright lighting.

On request, pieces of film can be supplied for application by the Customer (e.g. for finishing doors, archways or other accessories). DI-NOC film is extremely easy to apply. No water is required and there is no risk of the formation of bubbles or other defects(1). Cladding of the following items with DI-NOC film is never included and must be ordered as an optional: roof, canopies, pathways, structural reinforcements (ties, struts, beams, etc.) and other accessories not mentioned in the above description.

Pattern Three-Dimensionality

Almost all patterns have a 3D surface: this unique feature creates a striking, very realistic effect (e.g. wood, leather, etc. finishes).

Durability Warranty

DI-NOC products are guaranteed(1)) for up to 12 years (depending on type and exposure), are flame-retardant and carry the CE marking.

Combined SKIN and RAL Solutions

Laquila SKIN is available in 2 different solutions:

EXTERNAL

All material painted with dry-state polyester powders in the matching RAL colour(2) + DI-NOC film only on the outside of the structure (the cladding is applied to the outside of the uprights, the crossbeams, the glass doors, the door frames and any blind panels). This solution strikes the right balance between architectural and budget considerations. The structure is completely clad on the outside. On the inside, it will be finished in a RAL colour to match the pattern (with coloured glass, due to the reflected light the exact finish of the inside of the shaft is not always clearly visible: this makes the use of the cladding on the outside only more acceptable).

COMPLETE

All material painted with dry-state polyester powders in the matching RAL colour(2) + DI-NOC film on the outside and inside of the structure (the cladding is applied to the outside of the uprights, the crossbeams, the glass doors, the door frames and any blind panels + to the inside of the shaft: upright casing, cross beam casing and glazing beads). This is the most radical solution, with virtually no compromise on appearance. It is preferable for indoor installations where the finest possible appearance is required, and where the lift enclosure is in clear glass with bright lighting.

On request, pieces of film can be supplied for application by the Customer (e.g. for finishing doors, archways or other accessories). DI-NOC film is extremely easy to apply. No water is required and there is no risk of the formation of bubbles or other defects(1). Cladding of the following items with DI-NOC film is never included and must be ordered as an optional: roof, canopies, pathways, structural reinforcements (ties, struts, beams, etc.) and other accessories not mentioned in the above description.

Pattern Three-Dimensionality

Almost all patterns have a 3D surface: this unique feature creates a striking, very realistic effect (e.g. wood, leather, etc. finishes).

Colour & Pattern Options