DUMBWAITERS & TROLLEY LIFTS

SOMETIMES CALLED A MICRO LIFT, A SMALL SERVICE LIFT, A FOOD LIFT OR A KITCHEN LIFT, DUMBWAITER LIFTS ARE IDEAL FOR TRANSPORTING FOOD AND DRINK BETWEEN LOCATIONS OR FLOORS IN A RESTAURANT, BAR OR PUB.

These small lifts are perfect for the repeated movement of small loads in a range of other businesses too.

At Axess 2 we provide a broad range of dumbwaiter lifts that are suitable for use within a range of situations. Whether you are looking for a dumbwaiter to transport food efficiently between the kitchen and dining areas in a restaurant, or are seeking a home installation to assist a disabled person, our proven service for dumbwaiter lifts can ensure that your requirements are fully met at all times.

A dumbwaiter is also of value in numerous other environments which may not immediately spring to mind. For example, they can be used for transporting goods in a shop, moving stationery between office floors, or relocating records in a medical centre or hospital. Because of this flexibility, dumbwaiters typically prove to be great assistance to any sort of business environment.

Dumbwaiters were first invented in the 19th century, although the original meaning of the phrase actually indicated a device that was more akin to a serving tray. Nonetheless, the new meaning soon became the exclusively accepted definition, and the success of dumbwaiter lifts is clearly evident from the fact that they still see such widespread use today.

Our reliable selection of varying lifts have already been utilised within some of the UK’s most prestigious establishments, so you can always be certain of receiving the very best quality service when you choose Axess 2. For more information, please get in touch with our professional team now and we will be pleased to help meet your dumbwaiter needs.

Type Capacity Door Height Speed Cabin Dimensions Shaft Dimensions Pit Depth/serving Height mm Min. Headroom mm
width depth width depth P/Sh
ISO-A
Vertical bi-parting doors on serving height
50 Kg 600-1200 mm 0,4 m/s 400-600 400-600 cabin width + 300 cabin depth + 150 Sh = min. 700 Serving height + door height + 1260
100 Kg 600-1200 mm 0,4 m/s 400-1000 400-1000 cabin width + 300 cabin depth + 150 Sh = min. 700 Serving height + door height + 1260
300 Kg 600-1200 mm 0,25 m/s 400-1000 400-1000 cabin width + 300 cabin depth + 150 Sh = min. 700 Serving height + door height + 1360
ISO-C
Vertical bi-parting doors serving at floor level
100 Kg 600-1200 mm 0,27 m/s 500-1000 500-1000 cabin width + 350 cabin depth + 150 P = min. DH/2 + 50 Door height + 1260
300 Kg 600-1200 mm 0,25 m/s 500-1000 500-1000 cabin width + 350 cabin depth + 150 P = min. DH/2 + 50 Door height + 1360
ISO-D
Swing doors serving at floor level
100 Kg 600-1200 mm 0,27 m/s 400-1000 500-1000 cabin width + 350 cabin depth + 110 P = min. 250 Door height + 1260
100 Kg 600-1200 mm 0,25 m/s 400-1000 600-1000 cabin width + 350 cabin depth + 110 P = min. 250 Door height + 1360

AVAILABLE MODELS

MODEL ISO-A

Service lift with bi-parting doors and a serving height of 700mm (min)

MODEL ISO-C

Service lift with bi-parting doors serving at floor level

MODEL ISO-D

Service lift with swing doors serving at floor level

MODEL ISO-Z

Service lift with double deck cabin serving at floor level

MODEL ISO-U

The undercounter service lift with one swing door and a floor access

MODEL ISO-A DUMBWAITER

Service lift with bi-parting doors and a serving height of 700mm (min)

Structure

  • Steel structure, made of cold rolled galvanized special profiles
  • pre-installed with T-guides T 45 x 5 + plastic trunking in 2 m segments

Cabin

  • 600 – 800 mm height (resp. 900 – 1200 mm extra-charge)
  • Cant-off system made of galvanized steel, adjustable guide shoes on both sides
  • removable shelf
  • Compensation device on suspension ropes / chains

Bi-parting doors

  • 600 – 800 mm height (resp. 900 – 1200 mm extra-charge)
  • manual operated bi-parting doors made of galvanized steel in accordance to DIN 18092
  • with side frames made of galvanized steel according to drawing

Machine room door

  • single hinged door (DW = 800 mm = double hinged), with sash lock, both hinging sides available
  • with side frames made of galvanized steel according to drawing

Drive unit

  • Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz
  • Q = 50 – 100 kg: sheave Ø 300 diameter for 2 ropes Ø 6 mm
  • Q > 100 – 300 kg: 2 chain wheels for 2 chains

Counter weight or balancing weight

  • galvanized frame construction with iron in fills

Controller

  • call and send control with 24 V, safety circuit 230 V
  • pre-wired with plugs
  • adjustable and time-limited dispatch delay device (1-5 s)
  • acoustic arrival signal
  • position indicator on each entrance
  • thermic motor protection as main switch pre-wired on control panel
  • machine room light with socket

MODEL ISO-C DUMBWAITER

Service lift with bi-parting doors serving at floor level

Structure

  • Steel structure, made of cold rolled galvanized special profiles
  • pre-installed with T-guides T 45 x 5 + plastic trunking in 2 m segments

Cabin

  • Cant-off system made of galvanized steel, adjustable guide shoes on both sides
  • removable shelf
  • Compensation device on suspension ropes / chains

Bi-parting doors

  • manual operated bi-parting doors made of galvanized steel in accordance to DIN 18092
  • with side frames made of galvanized steel according to drawing

Machine room door

  • single hinged door (DW = 800 mm = double hinged), with sash lock, both hinging sides available
  • with side frames made of galvanized steel according to drawing

Drive unit

  • Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz.
  • Q = 50 – 100 kg: sheave Ø 300 diameter for 2 ropes Ø 6 mm
  • Q > 100 – 300 kg: 2 chain wheels for 2 chains

Counter weight or balancing weight

  • galvanized frame construction with iron in fills

Controller

  • call and send control with 24 V, safety circuit 230 V
  • pre-wired with plugs
  • adjustable and time-limited dispatch delay device (1-5 s)
  • acoustic arrival signal
  • position indicator on each entrance
  • thermic motor protection as main switch pre-wired on control panel
  • machine room light with socket

MODEL ISO-D DUMBWAITER

Service lift with swing doors serving at floor level

Structure

  • Steel structure, made of cold rolled galvanized special profiles
  • pre-installed with T-guides T 45 x 5 + plastic trunking in 2 m segments

Cabin

  • Cant-off system made of galvanized steel, adjustable guide shoes on both sides
  • Compensation device on suspension ropes / chains

Bi-parting doors

  • manual operated hinged doors, made of galvanized steel in accordance to DIN 18090
  • with side frames made of galvanized steel according to drawing

Machine room door

  • single hinged door (DW = 800 mm = double hinged), with sash lock, both hinging sides available
  • with side frames made of galvanized steel according to drawing

Drive unit

  • Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz
  • Q = 100 kg: sheave Ø 300 diameter for 2 ropes Ø 6 mm
  • Q > 100 – 300 kg: 2 chain wheels for 2 chains

Counter weight or balancing weight

  • galvanized frame construction with iron in fills

Controller

  • call and send control with 24 V, safety circuit 230 V
  • pre-wired with plugs
  • adjustable and time-limited dispatch delay device (1-5 s)
  • acoustic arrival signal
  • position indicator on each entrance
  • thermic motor protection as main switch pre-wired on control panel
  • machine room light with socket

MODEL ISO-Z DUMBWAITER

Service lift with double deck cabin serving at floor level

Structure

  • Steel structure, made of cold rolled galvanized special profiles
  • pre-installed with T-guides T 45 x 5 + plastic trunking in 2 m segments

Cabin

  • Cant-off-system made of galvanized steel, adjustable guide shoes on both sides
  • Compensation device on suspension ropes / chains

Bi-parting doors

  • manual operated bi-parting doors made of galvanized steel in accordance to DIN 18092,
  • manual operated single hinged doors made of galvanized steel in accordance to DIN 18090,
  • with side frames made of galvanized steel according to drawing

Machine room door

  • single hinged door (DW = 800 mm = double hinged), with sash lock, both hinging sides available
  • with side frames made of galvanized steel according to drawing

Drive unit

  • Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz
  • 2 chain wheels for 2 chains

Counter weight or balancing weight

  • galvanized frame construction with iron infills

Controller

  • call and send control with 24 V, safety circuit 230 V
  • pre-wired with plugs
  • adjustable and time-limited dispatch delay device (1-5 s)
  • acoustic arrival signal
  • position indicator on each entrance
  • thermic motor protection as main switch pre-wired on control panel
  • machine room light with socket

MODEL ISO-U DUMBWAITER

Service lift with one swing door and a floor flap

Structure

  • Steel structure, made of cold rolled galvanized special profiles
  • pre-installed with T-guides T 70 x 65 x 9 + plastic trunking in 2 m segments
  • Compensation device on suspension ropes
  • Complete absorption of the flaps’ encumbrances
  • Prepared for cladding on site

Cabin

  • Cant-off system made of galvanized steel, adjustable guide shoes on both sides
  • hushed mechanism for flap opening

Hinged Doors

  • manual operated hinged doors, made of galvanized steel in accordance to DIN 18090
  • production controlled by TÜV-authorities
  • with side frames made of galvanized steel according to drawing
  • door locks type-tested by TÜV-authorities

Flap

  • loading capacity 500 kg / m²
  • automatical opening and closing
  • made as screed tub for any kinds of flooring

Drive unit

  • Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz. according to IEC
  • Drum Ø 240 and pulleys Ø 200 for 2 ropes Ø 5 mm suspension 2:1

Controller

  • Deadman-control with key switch mounted in controller box
  • position indicator on each entrance
  • thermic motor protection as main switch pre-wired on control panel