SuperIdroFit - Passenger Lift

Main features

Superidrofit has the power unit inside lift shaft. The controller and all electric equipments are placed inside a landing door frame.

No machine room needed. Main switches, thermostat detecting the temperature of the area,lamps, are inside the landing door frame.

The floor where the power unit and electrics are located can be the lower or any intermediate or upper floor.

The minimum dimensions of the headroom and the pit are the same as for a conventional lift with a machine room. In other words the power unit in shaft does not affect the pit and headroom dimensions.

Power unit and controller are very close to each other. This will simplify erection, maintenance and rescue operations. The noise level is the same as a traditional lift. The power unit is very slim; so the shaft size is not increased due to this component.

Available layouts: 1 car entrance,
2 opposite, 2 adjacent entrances.

Safety

Rescue operations are carried out from the landing by opening the cabinet in the door frame where the power unit is located.

The power unit is extractable onto the landing floor, so that inspection and maintenance operations can be very easy.

Rescue operations can be also made without extracting the power unit. As for Idrofit models, the mounting of lift is very similar to a standard hydraulic lift.

Maintenance operations do not need to be carried out from inside the shaft as happens with a hydraulic lift model with the power unit inside the pit. With Superidrofit, power unit components can be adjusted from the landing floor.

To see any of our products in action, call us on 01200 405005 or email info@axess2.co.uk.