IdroFit - Passenger Lift

Main features

The machinery occupies 0.5m (width 950mm, depth 550mm), compared to the about 3m required by a traditional machine room (for example width 1500mm, depth 2000mm). All the components such as the main and light switches,
thermostat detecting the temperature of the area and lamps,are now placed inside a cabinet, 2m high (minimum height to allow maintenance operations).

Power unit and controller are very compact, making installation, maintenance operations and emergency rescue easier.

The cabinet dimensions remain the same, independently of the machine features (capacity, speed, number of floors served): it can be installed close to the shaft up to 15-20 metres from the lift (depending on the hydraulic piping run).

If the shaft is not fire protected,or particular fire-fighting  features are not required, the cabinet can be located inside the  wall, partially or totally, thus reducing the depth required.

Certified models cover the most flexible range of products on the market in terms of capacity, machinery size and finishes, landing and car door size and type.

Safety

On opening the cabinet, with a specific key, the space necessary for maintenance and rescue operations is indicated.

Machinery installation is similar to that for a traditional lift.

The maintenance operations of the machinery do not require access inside the shaft, as lifts with the machinery unit in the pit would require.

To see any of our products in action, call us on 01200 405005 or email info@axess2.co.uk.